ProductsDental Training ProductsConservative DentistryEndodontics Area

Endodontic Training Jaw Model [CON7002-UL-HD-HM]

Features

Enables endodontic training, including working length determination, using an electronic apex locator
Practice can be performed using the 700 series B22X or B22XR tooth models with electrically conductive paste(#11, #24, #26, #33, #36, #44; tooth models sold separately)
The winged door design securely holds the endodontic tooth models, allowing rubber dam attachment to simulate a clinical setting
Compatible with X-ray imaging

*Digital sensors may not be compatible.

Training Purpose	#Root canal length measurement(19) Some teeth may not fit due to its shape. Measured using electric apex probe.
Components	•Model Upper Jaw, Model Lower Jaw : 1pc. each •Conductive Paste : 1 tube •Conductive Paste Nozzle/Cap : 1pc. each •Wax : 1 pcs. •power Cords : 2pcs. •Screwdriver : 1 pc.

Usage Methods

Model Tooth Mounting Methods

1,Remove the screw from the winged door using the included screwdriver and open the door.

2,Apply the conductive paste to the apical foramen of the tooth model and allow it to dry for about 12 hours.

3,Slowly insert the tooth model into the appropriate socket in the jaw model.

4,Close the winged door and secure it with the screw.

5,Remove the metal plate from the base of the jaw model by loosening the two screws with the included larger screwdriver.

6,Fill the socket with the conductive paste so that it slightly protrudes from the bottom of the jaw model, then reattach the metal plate.

Apex Locator Connection Methods

1,Attach the included cord to the patient terminal of the electronic apex locator.

2,Insert the connector at the end of the cord into the terminal on the metal plate.

3,Attach a file or reamer to the file/reamer terminal of the electronic apex locator. Measure the working length following the instruction manual of the electronic apex locator.